We are able to test and calibrate wide range of portable or fixed gas detectors from all makers such as RIKEN KEIKI, DRÄGER, MSA, BW, RAE, CROWCON/UNITOR etc. If any parts require replacement we can provide competitive offers for various types of gas detectors such as sensors, filters as well as body covers, battery packs and others. We have experience with assessment of their lifetime. We are able to provide most of mentioned parts ex. stock or with short delivery time. Please see tab “Certificates” to see our authorisations.
Marine Invest Poland is official and certified Riken Keiki distributor and service center.
(Ullage Temperature Interface)
To provide complex handling with our customers’ equipment we propose also the calibration services for UTI appliances. UTI maintenance services includes as follows: MMC Ullage Temperature Interface, Enraf TankSystem Ullage Temperature Interface, Tanktech Ullage Temperature Interface.
We are able to provide any parts replacement for various types of UTI devices such as tapes, sensors and many others. All the parts are usually available on stock.
Marine Invest Poland is official and certified distributor of SHT2002 Ullage Temperature Interface by Sea Hover Technologies Pte Ltd and service center.
FIXED GAS DETECTION SYSTEMS
Our company can provide a wide range of gas detection solutions as well as calibration of Fixed Gas Detection Systems. This particular service is always performed on board of the vessel. We can provide full support for all Fixed Systems. We are able to perform services of equipment manufactured by: Riken Keiki, TQ Environmental, Consilium, MSA, Toka Seiki and others.
OILY WATER SEPARATOR (15 PPM) & OIL DISCHARGE MONITORING EQUIPMENT
Our company offers annual inspections of ODME systems and 15 PPM monitors. Check-up, calibration, testing and if necessary adjusting and/or repairs of the system according to maker’s instructions. After each Inspection the crew is instructed on performing all tests and maintainance of ODME system. Our Engineers are always willing to provide technical advice by email and work with ship crew to try and solve a problem remotely.
Regarding OWS 15 PPM Monitor we perform activities such as confirming cleanliness, checking and verifying, testing and if necessary adjusting and/or repairs of the system according to maker’s instructions. We are able to carry out 5-yearly calibration. Spare parts are on stock and most parts can be obtained within 24 hours. We are able to support your vessls with exchange service plan. It means that we are able to ship an already serviced and re-certified 15 PPM Monitor to any port in the world. Afterwards the onboard monitor is returned to us to be serviced and re-certified for the next vessel.
Since 2021 Marine Invest Poland is authorized service station and distributor for JOWA AB, and service station for RIVERTRACE.
We are able to carry out system check / calibration / service for other makers such as Brannstrom, KSB Seil Seres, Deckma, VAF, Georim, Fellow Kogyo and others.
TEMPERATURE CALIBRATORS, THERMOMETERS
All calibrators on board ships require to be tested every year. We are able to perform such calibration which should take place ashore – not on board. Certificates issued by our company will serve later on as proven accuracy of the devices. Such certificate proves that calibrated device was checked and tested and it will be showing proper readings on all necessary temperature sensors and thermometers existing on board. We are able to calibrate all devices manufactured by: Temperature & Thermometers, SIKA, AMETEK, EiUK, FLUKE, DRUCK & TEMPERATUR, SCAN SENSE, TECHNE, WIKA and others.
PRESSURE CALIBRATORS, GAUGES & TORQUE WRENCHES
As we would like to provide full range of calibration services to our customers we also can perform calibration of pressure gauges, pressure calibrators & torque wrenches. Our workshop is equipped with professional instruments with very accurate digital test gauges.
We are able to calibrate all types of torque equipment to manufacturer standards, giving you the confidence to know that your device is generating accurate measurements each and every time you use it.
It is important to regularly ensure that your torque devices are displaying accurate results, and performing the calibration proces makes sure that the readings of your device are accurate to a set standard.
In terms of repair, we can get torque equipment repaired directly by manufacturers and can also repair selected torque equipment in-house.
We are able to calibrate the following types of torque equipment:
• Wrenches (Brake, click type etc)
Calibration gases are used for calibration of portable gas detection instruments and calibration of fixed gas detection systems. We produce single gases (flammable gases, oxygen, toxic gases) and gas mixtures (2, 3, 4 or 5 gas mixtures) in various cylinder sizes 10 ltr, 34 ltr, 58 ltr or 110 ltr. We are able to produce any gas in big 1500 ltr cylinders (1.5 m3). Our company supplies flow regulator valves with different flow rates and thread connections for our gas cylinders. Manual type flow regulators are used for diffusion type gas detecting instruments which do not have a pump. Demand flow regulating valves are used for gas detection instruments with an internal (or external) pump. Our company also supplies accessories like gas sampling bags, sampling hoses, calibration adapters and carrying cases.
With a growing network of local partners, we are available to supply your vessels in most of major ports worldwide.
GAS DETECTION TUBES
Since 2021 Marine Invest Poland is official distributor for Uniphos Envirotronic Inc. – manufacturer of Uniphos & KwikDraw gas detector tubes. Our products provide a simple and reliable means of quickly determining the presence and concentration about 300 gases and vapors.
The Uniphos brand of detector tubes are used with the precision ASP-40 piston hand pump. The air sample is drawn through the narrow tube containing a specific gas sensing chemical causing a colour change. The length of colour stain gives the concentration which is read directly from the measurement scale printed on the tube. The piston style pump and tube configuration often have the measurement based on a single pump stroke.
KwikDraw detector Tubes formerly known as MSA/AUER detector tubes are a reliable method of testing more than 200 hazardous gases and vapours. A sample is drawn by connecting the detector tube to a special bellows-type pump that draws a known volume of air with each stroke. The Sensing Chemical in detector tubes will change colour if target gas is present in the sample air. The length of this discoloration indicates the concentration of the hazardous gas or Vapour and can be measured by a printed scale on most of the tubes. KwikDraw Detector Tubes are pre-calibrated and provide quick, economical monitoring for wide range of various Toxic and Hazardous gases. The Kwikdraw Deluxe pump and Gas Tester II offer automatic stoke counter with unique end of stroke indicator.
We can offer to our customers professional SERVICE ENGINEERS/TECHNICIANS able to perform various repairs and production jobs. Our employees poses great experience in fields of power hydraulics, main and auxiliary engines, steel construction, welding, laying of electrical cables, electrical/electronic appliances, carpentry, steel surfaces treatment and painting and many others. Our fitters and welders are experienced in shipyard works and can communicate in English. All of them are certified welders – they hold Welding Certificates issued by the internationally recognized classification societies. The variety of well trained personnel in marine and industrial fields is quite wide and therefore as customer please do not hesitate to send us your inquiry.
Maintenance and painting works
MAIN AND AUXILIARY ENGINES (REPAIR AND MAINTENANCE)
Sulzer type Z40, A25, A20, S20
DIAGNOSTICS, REPAIR & OVERHAUL OF SHIP AUTOMATION AND ELECTRONICS
Søren T. Lyngsoe